Author Index

A

  • Abadi, Zahra Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Abdolazizi, Sara The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Aboutalebi, M.R. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Abtahi, K. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Akbarpour Arbatan, Mohammad Reza Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Alipour, Saeid Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Alizadeh, Masoud Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Alizad Farzin, Yousef Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Amirimehr, Amir Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Aniseh, Nastaran Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • Asadi Tabrizi, Roshanak Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Asjadi, Fatemeh Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
  • Asjodi, Ali In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Azim-Araghi, Mohammad Esmaeil Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]

B

  • Baghshahi, Saeid The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]

D

  • Davoodpour, Mahdi Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Doostmohammadi, Ali Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]

E

  • Ebadzadeh, Touraj Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Ebadzadeh, Touraj Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]

F

  • Faeghinia, Aida Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • FaqihImani, Azade Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Farahinia, Laleh Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
  • Fazlali, Alireza Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Feizpour, Mahdi Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]

G

  • Ganjali, Monireh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
  • Ghaffarian, Zeinab Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Ghahremanzadeh, H. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • Ghasemi, Ebrahim Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Golzar Shahri, Mohsen Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]

H

  • Hadavi, Mohammad Mehdi Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Hayati, Raziye Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Hesaraki, Saeed Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Heydari, Fatemeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Honarbakhsh Rauof, Abbas Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]

J

  • Jafari, Azam Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Jafarian, Mojtaba Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Javaheri, Masoumeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]

K

  • Kazemzadeh, Asghar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Keihan Asl, Mahvash Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Khakpour, Zahra Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Kiani, Marzieh Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]

L

  • Leisi Azar, Fariba Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]

M

  • Maghsoudipour, Amir Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Manafi, Sahebali Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Massoudi, Abozar Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Mirzaee, Omid Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Mobasherpour, Iman Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
  • Mobasherpour, Iman In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Mortazavi, Y. Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]

N

  • Naghizadeh, R. The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Navidirad, Mahsa Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Nayebpashaee, Nasim Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]

P

  • Pourhashem, Sepideh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]

R

  • Rahimipour, Hamidreza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Raissi, Babak Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Razavi, Mansour In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Rezvani, Mohammad Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
  • Rezvani, Mohammad Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • Riahifar, Reza Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]

S

  • Saeri, MohammadReza Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Sahba Yaghmaee, Maziar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Saidi, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Salahi, Esmaeil Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
  • Salahi, Esmaeil In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Sangpour, Parveneh Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Sarpoolaky, H. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Sedaghati, Hossein Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Seyedein, Seyed Hossein Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Shafyei, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]

T

  • Taati-Asil, Fatemeh Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Tabean, S. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • Tafreshi, Reza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Tajabadi, Fariba Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Tamizifar, M. Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]

V

  • Vaezi, M.R. Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]

Z

  • Zamanian, Ali Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]